- Job reference: 16253
- Location: Andover, ENG, SP10, GB
- Job type: Permanent
- Job sector: CMM Inspector, Quality Inspector
- Salary: 35k/year - 50k/year
- Published: October 31, 2025
CMM Inspector CMM Inspector Andover, Hampshire Permanent | £35,000 – £50,000 Salary & Benefits: £35,000 – £50,000 per annum, depending on experience Overtime available Early finish on Fridays Life assurance Cycle to work scheme Permanent role with progression opportunities for the right candidate We are recruiting for a Manufacturing Inspector / Quality Assurance Engineer to join a well-established precision engineering manufacturer on a permanent basis. This is a hands-on quality role with a strong focus on CMM inspection, dimensional verification, and compliance with recognised quality standards. This position would suit either: A developing quality professional with solid CMM capability looking to progress, or A fully experienced Quality Engineer / Inspector seeking a stable, long-term role within a structured quality environment. Important Requirement Candidates must be confident in operating a CMM. This is a mandatory requirement — applications without hands-on CMM experience will not be considered. Key Responsibilities Carry out dimensional inspection of precision-engineered components using CMMs (offline programming and operation). Interpret engineering drawings, GD&T, and technical specifications. Prepare and review FAIR (First Article Inspection Reports) and ISIR documentation. Verify material certification and ensure compliance with engineering and quality requirements. Conduct manual inspection using precision measuring equipment including micrometers, calipers, height gauges, and gauges. Accurately record inspection results and maintain full traceability in line with quality management systems. Raise and report non-conformances, supporting investigations and corrective actions where required. Work closely with manufacturing, engineering, and quality teams to resolve issues and support production. Contribute to continuous improvement activities within the quality function. Support internal and external audits when required. Skills & Experience Essential: Proven experience in a manufacturing inspection or quality role within an engineering environment. Confident operation of CMM equipment (non-negotiable). Ability to read and interpret engineering drawings and GD&T. Experience working within ISO 9001 and/or AS9100 quality systems. Experience preparing FAIR and ISIR documentation. Strong attention to detail with clear documentation and reporting skills. Confident communicator, able to liaise across departments. Desirable: Formal engineering or quality qualifications (HNC, HND, NVQ, or equivalent). Experience supporting internal or external audits. Exposure to customer-specific quality standards. Awareness of Lean, Six Sigma, or continuous improvement methodologies. Working Hours: Monday – Thursday: 8:00am – 5:00pm Friday: 8:00am – 1:00pm (early finish) Additional Information Start date: ASAP Contract: Permanent (6-month probation period) The business is open to supporting development and progression for candidates with the right attitude and core CMM capability. Job not quite right for you? Related Jobs CMM Inspector Job reference: 13850Location: Kings Langley, ENG, WD4, GBJob type: PermanentSalary: 39k/year - 42k/yearPublished: February 17, 2026CMM Inspector / Programmer Location: Kings Langley, Hertfordshire Salary: Circa £21.00 per hour Employment Type: Full-Time | Permanent Benefits Modern, state-of-the-art CNC manufacturing and inspection facility Approachable and transparent management team Ongoing training and career development Friendly, supportive working environment 25 days holiday plus Bank Holidays Company pension scheme PPE provided Overview An excellent opportunity to join a high-precision CNC manufacturing business specialising in complex machined components for sectors including aerospace, defence, motorsport and robotics. Based in a clean, modern engineering facility, this role focuses on CMM inspection and programming of tight-tolerance precision machined components produced using advanced CNC machining processes. You will play a key role in ensuring components meet exact customer, drawing and quality standard requirements while supporting the inspection department with accurate measurement and reporting. The successful candidate will be confident programming CMM machines, ideally using PC-DMIS, although experience with other CMM software will also be considered. Key Responsibilities Program and operate CMM machines to inspect precision machined components Create and edit CMM programs for new and existing parts Carry out mechanical inspection of precision machined components Perform manual inspection using precision measuring equipment Interpret engineering drawings, specifications and GD&T requirements Verify CMM inspection results through manual measurement where required Complete First Article Inspection (FAI) reports and quality documentation Compile Certificates of Conformity and inspection reports Maintain component traceability and inspection records Work closely with production teams to resolve quality issues Support continuous improvement and problem-solving activities within the quality department Skills & Experience Experience programming and operating CMM equipment Experience with PC-DMIS preferred, although other CMM software will be considered Strong understanding of engineering drawings and GD&T Experience inspecting tight-tolerance machined components Good attention to detail with a methodical approach to inspection Organised, reliable and able to prioritise workload Comfortable working independently and as part of a team Basic IT skills (Microsoft Office) Advantageous Experience Experience using Visual FAIR / Q-Pulse Experience working to AS9100 or ISO 9001 standards Background in subcontract precision machining environments Experience inspecting aerospace or high-specification components Hours of Work 40hrs per week Monday to Friday – 8:00am to 4:00pm Regular overtime available (typically 10+ hours per week), paid at x1.5 Why Apply? This is an opportunity to join a well-invested, high-precision engineering business where quality inspection and CMM programming play a critical role in production. You will work in a modern, clean facility inspecting complex machined components for demanding sectors using advanced inspection equipment. The company offers long-term stability, regular overtime, and the opportunity to further develop your CMM programming and quality engineering skills within a supportive and experienced engineering team. View CMM Inspector job CMM Inspector Job reference: 16290Location: Andover, ENG, SP10, GBJob type: PermanentSalary: 33k/year - 40k/yearPublished: February 18, 2026Quality Inspector / CMM Programmer Location: Andover, Hampshire Salary: £33,000 – £40,000 per annum (DOE) Type: Full-Time | Permanent Hours & Benefits 39 hours per week Mon–Thu: 08:00 – 17:00 | Fri: 08:00 – 13:00 Overtime available, paid at x1.5 25 days holiday + Bank Holidays Pension, Death in Service & Cycle to Work Modern facility, early Friday finish, supportive team The Role We’re recruiting an experienced Quality Inspector / CMM Programmer to join a precision engineering business producing high-tolerance machined components for regulated industries. This is a hands-on inspection role with a strong focus on CMM programming and operation. You’ll be responsible for dimensional inspection of complex components, producing FAIR / ISIR documentation and ensuring full compliance with AS9100 and ISO 9001 quality standards. CMM inspection experience
View CMM Inspector job
- Job reference: 16253
- Location: South Way, Andover, ENG, SP10 5AF, GB
- Job type: Permanent
- Job sector: CMM Inspector, Quality Inspector
- Salary: 33k/year - 40k/year
- Published: October 31, 2025
Quality Inspector / CMM Programmer Quality Inspector / CMM Programmer Location: Andover, Hampshire Salary: £33,000 – £40,000 per annum (DOE) Type: Full-Time | Permanent Hours & Benefits 39 hours per week Mon–Thu: 08:00 – 17:00 | Fri: 08:00 – 13:00 Overtime available, paid at x1.5 25 days holiday + Bank Holidays Pension, Death in Service & Cycle to Work Modern facility, early Friday finish, supportive team The Role We’re recruiting an experienced Quality Inspector / CMM Programmer to join a precision engineering business producing high-tolerance machined components for regulated industries. This is a hands-on inspection role with a strong focus on CMM programming and operation. You’ll be responsible for dimensional inspection of complex components, producing FAIR / ISIR documentation and ensuring full compliance with AS9100 and ISO 9001 quality standards. CMM inspection experience is essential. Key Responsibilities Program and operate CMMs for dimensional inspection Inspect precision-machined components using CMM and manual methods Prepare and review FAIRs and ISIRs Verify material certification against drawings and specifications Record inspection results, non-conformances and corrective actions Support audits and quality investigations Maintain traceability, calibration and quality documentation Essential Experience Proven experience as a Quality Inspector with CMM programming capability Strong understanding of AS9100 / ISO 9001 Confident reading engineering drawings and GD&T Skilled using micrometres, calipers, gauges and inspection equipment Detail-focused, methodical and quality-driven Why Apply? If you’re a CMM-focused Quality Inspector who enjoys inspecting complex, tight-tolerance components in a professional, quality-led environment, this role offers stability, modern facilities and long-term development. Job not quite right for you? Related Jobs CMM Inspector Job reference: 16290Location: Andover, ENG, SP10, GBJob type: PermanentSalary: 33k/year - 40k/yearPublished: February 18, 2026Quality Inspector / CMM Programmer Location: Andover, Hampshire Salary: £33,000 – £40,000 per annum (DOE) Type: Full-Time | Permanent Hours & Benefits 39 hours per week Mon–Thu: 08:00 – 17:00 | Fri: 08:00 – 13:00 Overtime available, paid at x1.5 25 days holiday + Bank Holidays Pension, Death in Service & Cycle to Work Modern facility, early Friday finish, supportive team The Role We’re recruiting an experienced Quality Inspector / CMM Programmer to join a precision engineering business producing high-tolerance machined components for regulated industries. This is a hands-on inspection role with a strong focus on CMM programming and operation. You’ll be responsible for dimensional inspection of complex components, producing FAIR / ISIR documentation and ensuring full compliance with AS9100 and ISO 9001 quality standards. CMM inspection experience is essential. Key Responsibilities Program and operate CMMs for dimensional inspection Inspect precision-machined components using CMM and manual methods Prepare and review FAIRs and ISIRs Verify material certification against drawings and specifications Record inspection results, non-conformances and corrective actions Support audits and quality investigations Maintain traceability, calibration and quality documentation Essential Experience Proven experience as a Quality Inspector with CMM programming capability Strong understanding of AS9100 / ISO 9001 Confident reading engineering drawings and GD&T Skilled using micrometres, calipers, gauges and inspection equipment Detail-focused, methodical and quality-driven Why Apply? If you’re a CMM-focused Quality Inspector who enjoys inspecting complex, tight-tolerance components in a professional, quality-led environment, this role offers stability, modern facilities and long-term development. View CMM Inspector job CMM Inspector Job reference: 16290Location: Andover, ENG, SP10, GBJob type: PermanentSalary: 33k/year - 40k/yearPublished: February 18, 2026Quality Inspector / CMM Programmer Location: Andover, Hampshire Salary: £33,000 – £40,000 per annum (DOE) Type: Full-Time | Permanent Hours & Benefits 39 hours per week Mon–Thu: 08:00 – 17:00 | Fri: 08:00 – 13:00 Overtime available, paid at x1.5 25 days holiday + Bank Holidays Pension, Death in Service & Cycle to Work Modern facility, early Friday finish, supportive team The Role We’re recruiting an experienced Quality Inspector / CMM Programmer to join a precision engineering business producing high-tolerance machined components for regulated industries. This is a hands-on inspection role with a strong focus on CMM programming and operation. You’ll be responsible for dimensional inspection of complex components, producing FAIR / ISIR documentation and ensuring full compliance with AS9100 and ISO 9001 quality standards. CMM inspection experience is essential. Key Responsibilities Program and operate CMMs for dimensional inspection Inspect precision-machined components using CMM and manual methods Prepare and review FAIRs and ISIRs Verify material certification against drawings and specifications Record inspection results, non-conformances and corrective actions Support audits and quality investigations Maintain traceability, calibration and quality documentation Essential Experience Proven experience as a Quality Inspector with CMM programming capability Strong understanding of AS9100 / ISO 9001 Confident reading engineering drawings and GD&T Skilled using micrometres, calipers, gauges and inspection equipment Detail-focused, methodical and quality-driven Why Apply? If you’re a CMM-focused Quality Inspector who enjoys inspecting complex, tight-tolerance components in a professional, quality-led environment, this role offers stability, modern facilities and long-term development. View CMM Inspector job CMM Inspector Job reference: 16253Location: Andover, ENG, SP10, GBJob type: PermanentJob sector: CMM Inspector, Quality InspectorSalary: 35k/year - 50k/yearPublished: October 31, 2025CMM Inspector Andover, Hampshire Permanent | £35,000 – £50,000 Salary & Benefits: £35,000 – £50,000 per annum, depending on experience Overtime available Early finish on Fridays Life assurance Cycle to work scheme Permanent role with progression opportunities for the right candidate We are recruiting for a Manufacturing Inspector / Quality Assurance Engineer to join a well-established precision engineering manufacturer on a permanent basis. This is a hands-on quality role with a strong focus on CMM inspection, dimensional verification, and compliance with recognised quality standards. This position would suit either: A developing quality professional with solid CMM capability looking to progress, or A fully experienced Quality Engineer / Inspector seeking a stable, long-term role within a structured quality environment. Important Requirement Candidates must be confident in operating a CMM. This is a mandatory requirement — applications without hands-on CMM experience will not be considered. Key Responsibilities Carry out dimensional inspection of precision-engineered components using CMMs (offline programming and operation). Interpret engineering drawings, GD&T, and technical specifications. Prepare and review FAIR (First Article Inspection Reports) and ISIR documentation. Verify material certification and ensure compliance with engineering and quality requirements. Conduct manual inspection using precision measuring equipment including micrometers,
View Quality Inspector / CMM Programmer job
- Job reference: 13850
- Location: Kings Langley, ENG, WD4, GB
- Job type: Permanent
- Salary: 36k/year - 40k/year
- Published: February 17, 2026
Quality Inspector Quality Inspector – Precision Machined Components Location: Kings Langley, Hertfordshire Salary: Up to £40,000 per annum Employment Type: Full-Time | Permanent Benefits Modern, state-of-the-art CNC manufacturing and inspection facility Approachable and transparent management team Ongoing training and career development Friendly, supportive working environment 25 days holiday plus Bank Holidays Company pension scheme PPE provided Overview An excellent opportunity to join a high-precision CNC manufacturing business specialising in complex machined components for sectors including aerospace, defence, motorsport and robotics. Based in a clean, modern engineering facility, this role focuses on mechanical quality inspection of tight-tolerance parts produced using advanced CNC machining processes. You will play a key role in ensuring components meet exact customer, drawing and quality standard requirements. Key Responsibilities Mechanical inspection of precision machined parts and components Manual and visual inspection using precision measuring equipment Operate CMMs and interpret inspection results Verify CMM reports through manual inspection where required Complete First Article Inspection (FAI) reports Compile Certificates of Conformity and quality documentation Maintain full component traceability and document control Liaise with machining teams and management on quality issues Support problem-solving and continuous improvement activities Skills & Experience Strong attention to detail and methodical working approach Experience inspecting tight-tolerance machined components Confident working from engineering drawings Organised, reliable and able to prioritise workload Analytical mindset with good problem-solving ability Comfortable working independently and as part of a team Basic IT skills (Microsoft Office) Advantageous Experience CMM inspection experience (PC-DMIS preferred) Use of Visual FAIR / Q-Pulse Experience working to AS9100 or ISO 9001 standards Strong understanding of GD&T Background in subcontract precision machining environments Minimum 2 years’ quality inspection experience Hours of Work 40 hours per week Monday to Friday: 08:00 – 16:00 Regular overtime available (typically 10+ hours per week) Overtime paid at x1.5 Why Apply? This is a chance to join a well-invested, high-precision engineering business where quality inspection genuinely matters. You’ll work in a clean, modern environment inspecting complex, tight-tolerance machined components for demanding sectors, using advanced CNC and inspection equipment. The role offers long-term stability, regular paid overtime, and clear opportunities to develop your skills within a supportive, engineer-led team that values accuracy, consistency and continuous improvement. Job not quite right for you? Related Jobs Quality Inspector / CMM Programmer Job reference: 16253Location: South Way, Andover, ENG, SP10 5AF, GBJob type: PermanentJob sector: CMM Inspector, Quality InspectorSalary: 33k/year - 40k/yearPublished: October 31, 2025Quality Inspector / CMM Programmer Location: Andover, Hampshire Salary: £33,000 – £40,000 per annum (DOE) Type: Full-Time | Permanent Hours & Benefits 39 hours per week Mon–Thu: 08:00 – 17:00 | Fri: 08:00 – 13:00 Overtime available, paid at x1.5 25 days holiday + Bank Holidays Pension, Death in Service & Cycle to Work Modern facility, early Friday finish, supportive team The Role We’re recruiting an experienced Quality Inspector / CMM Programmer to join a precision engineering business producing high-tolerance machined components for regulated industries. This is a hands-on inspection role with a strong focus on CMM programming and operation. You’ll be responsible for dimensional inspection of complex components, producing FAIR / ISIR documentation and ensuring full compliance with AS9100 and ISO 9001 quality standards. CMM inspection experience is essential. Key Responsibilities Program and operate CMMs for dimensional inspection Inspect precision-machined components using CMM and manual methods Prepare and review FAIRs and ISIRs Verify material certification against drawings and specifications Record inspection results, non-conformances and corrective actions Support audits and quality investigations Maintain traceability, calibration and quality documentation Essential Experience Proven experience as a Quality Inspector with CMM programming capability Strong understanding of AS9100 / ISO 9001 Confident reading engineering drawings and GD&T Skilled using micrometres, calipers, gauges and inspection equipment Detail-focused, methodical and quality-driven Why Apply? If you’re a CMM-focused Quality Inspector who enjoys inspecting complex, tight-tolerance components in a professional, quality-led environment, this role offers stability, modern facilities and long-term development. View Quality Inspector / CMM Programmer job Quality Inspector Job reference: 16262Location: Unit D7, Sandown Industrial Park, Esher, KT10 8BL, GBJob type: PermanentJob sector: Quality InspectorSalary: 40k/yearPublished: December 12, 2025Quality Inspector Location: Esher, Surrey Salary: £33,000 – £40,000 per annum (negotiable, dependant on experience) Benefits: Company profits related bonus (at company discretion) 25 days holiday + Bank Holidays Free, on-site parking Free tea/coffee Company Profile A highly regarded manufacturer of precision machined parts and components, who consistently deliver high quality machined products to its customers operating in some of today’s most technically challenging markets, is looking for an experienced Quality Inspector to join their fully equipped Inspection department. The company offers excellent working conditions along with an interesting and varied workload. Duties: Manual inspection of highly precision machined parts and components using various equipment such as Micrometres, Verniers and Gauges. CMM Inspection, working with an Aberlink CMM (no previous CMM experience is required as training will be provided, however CMM experience is of course welcomed). Skills & Attributes: A strong Quality Inspection background (previous experience of working in a Precision Engineering environment is essential). Training provided in CMM inspection so no previous experience is required, however should you have CMM inspection experience this is an advantage. Be fully competent in reading and interpreting technical drawings. Experience inspecting to tight tolerances. Hours of Work: 39hrs per week £16.00 – £20.00 p/hr 8am to 5pm Mon – Thu, 8am to 1pm Fri OT available at 1.5x after 39 hours Interested? This role offers more than just a job – it’s a chance to join an established, growing and highly respected business with an excellent reputation for quality, precision and employee development. You’ll be working with cutting-edge equipment, supported with on-the-job training, and given the opportunity to build on your existing inspection skills. If you’re looking for a secure role where your attention to detail will be valued and rewarded, and where you can enjoy a supportive team environment and a healthy work-life balance with an early Friday finish, this could be the ideal next step in your career View Quality Inspector job CMM Inspector Job reference: 16290Location: Andover, ENG, SP10,
View Quality Inspector job
